|
Quantity
|
Price
|
||
|
|
|||
PECULIARITIES:
- Standard fillet welder for obtaining a larger seam in one pass
- Aluminum alloy construction with heat insulation plate for high temperature protection
- The rack and pinion mechanism of the holder allows you to smoothly move the burner along the console, adjust the height above the metal surface and the angle of inclination
- Dust-resistant running wheels made of high-quality rubber with grooves in the center, which allows you to install the carriage on guide rails
- To obtain a long weld seam, it is recommended to use corner guides 30x30 mm or 40x40 mm with a distance between centers of 180-185 mm, as well as guide rails 1.8 m long
- A touch switch can be located at the front of the machine, thanks to which the carriage automatically stops after welding is completed
WELDING PARAMETERS:
|
Welding wire diameter (d) |
Ø 1,2 mm |
Ø 1,4 mm |
Ø 1,6 mm |
|
|
Amperage (A) |
Lower position |
120-300 |
150-380 |
180-430 |
|
Angular position |
120-280 |
150-320 |
180-380 |
|
|
Horizontal position |
120-280 |
150-300 |
180-330 |
|
|
Voltage (U) |
U＝14 + 0,051 |
|||
|
Distance between nozzle and workpiece (H) |
if A ≤ 200, then H＝10-15 mm |
|||
|
Welding wire extension length (L) |
L=10d |
|||
SPECIFICATION:
|
Drive Chain |
four-wheel |
|
|
Power parameters |
Carriage |
220 V, 50 Hz |
|
Oscillator |
24 V |
|
|
Burner |
Vertical stroke |
120 mm |
|
Horizontal stroke |
220 mm |
|
|
Tilt angle |
±10° |
|
|
Rotation angle |
360° |
|
|
Speed |
0-780 mm/min |
|
|
Oscillator |
Oscillation angle |
±15° |
|
Delay time |
0-2,5 sec |
|
|
Oscillation speed |
0-100 mm/min |
|
|
Offset distance setting |
0～±8° |
|
|
Oscillation modes |
|
|
|
Weight (with oscillator) |
13,8 kg |
|
|
Dimensions |
425×268×230 mm |
|
SET:
- Welding carriage HK-31
- Guide rail 1.8 m
- Standard power cable, 16 m
- Fuse 2A, 2 pcs
- Hex key
- User manual