BSM 2540 is a hand-operated walk-through machine, with a rigid welded structure, eccentric mechanism and a guide vertical pressure beam moving unit, a solid steel angle has a sharp geometry to obtain a small R on workpieces when bending, a roller cut-off knife is standard, a bending the beam has a straightness adjustment unit. The machine is ideal for working with black and galvanized steel - 0.7mm (with tensile strength or strength σv ≤400MPa). The machine is ideal for working with black and galvanized steel - 0.8mm (with temporary resistance or strength σv ≤320MPa)

The BSM 2540/0.8 machine is universal for working with sills, slopes, additional elements of the roof, including for working with large-sized products - such as square ventilation (the overall overall dimensions of the upper pressure beam are 170x170 mm (height x depth)). Possibility of bending from 0° to 135° - in one bend, bending up to 180° - with compression in the pressure beam.

ADVANTAGES OF BSM 2540

• The guide vertical clamping beam movement unit allows you to fix the sheet with a stronger clamping force along the entire length of the machine
• Eccentric (crank) mechanism with limiter - allows you to quickly and conveniently press the workpiece
• A stopper is installed on the eccentric, preventing the beam from lowering in the upper position and fixing the beam in the lower position
• Bending up to 180° - with compression in the clamping beam, bending angle 150° for flanges up to 15mm and 135° for flanges over 15mm.
• Are completed with a roller knife for cutting of metal (in a standard complete set)
• Convenient place to place the roller knife during sheet bending
• The working surfaces of the pressure, main and bending beams are made of alloyed high-strength steel
• The steel solid corner, which is responsible for pressing the sheet, is attached to the pressure beam through threaded connections.
• Adjustment of the pressure beam relative to the main and bending beams - frontal offset
• Adjustment of the pressure beam in the vertical plane
• Adjustment of the bending beam, through the straightness adjustment unit
• Adjustment of the bending beam in the vertical plane
• Collapsible racks for easy transport
• Holes for fastening the machine to the floor

Specifications: